How to hang a plasma TV? - plasma tv wire covers
What is the easiest way to install the son of a plasma TV through the wall? Can I change the cable as well, because I heard it is not safe to run the cable into the wall? In addition, the use of a cover plate is in the area where the cables come in, like the one below? Also, does well, through the fire drill to me, so I can go through the Son?
http://cgi.ebay.com/HDMI-DVI-S-Scart-Com ...
Thank you very much.
Tuesday, January 26, 2010
Plasma Tv Wire Covers How To Hang A Plasma TV?
2 comments:
There are several things you can do. The Council has the nose is well connected. Here is another cheaper.
http://www.monoprice.com/products/produc ...
I would not run a cable from the wall manufacturer, if you can help. Depending on where you can break the code. You can use this device, which is a benefit to participate, without the power.
http://www.monoprice.com/products/produc ...
It has even fixed the nose plate.
You will need a box with high voltage for him, though. If you do not want to do that I intensive duty cable 12 gauge extension would use long enough that neither side on the wall, so you can be without the TV draw. Nothing was to be connected to an extension cord to the wall. High-strength cables are available for under Lowe's and Home Depot to 8 meters or 15 meters. Monoprice is a great place to find the cables. Digging in the fire barrier tape is good to respect but to not go again through the gypsum board. If you do not mind the wall patch can be reduced in the middle of t for a placeFire barrier tape to see that the cross section of it. Now, just before the drill straight in. It is very easy to find the wire to the location of the wall plate fish. The front inverted (with the collapse of the wall) are large, but if the cut-off low voltage in the table, which tends to use, has steep slopes to aggravate his son. If you cut may be cut into sections at Lowes OnQ green in the table
http://www.lowes.com/lowes/lkn?action=pr ...
and if you cut Home Depot orange Carlon yourself in the field.
http://www.mcmelectronics.com/product/28 ...
Good luck
Yes, you can drill through a fire barrier tape, and run A / V cable is. With respect to the power cord, I do not know if it runs the code breaks in the wall. I ran to me on the wall, and I had no problem. You can run an electrical outlet behind the TV, you can connect with some ROMEX from below link. I have installed a plate behind the TV, I cut a back box and stated that the son.
Post a Comment